The SV Maltese Falcon
Corbin 39′
Specifications
| Category: | Mono | Construction: | Fiberglass | |
| L-O-A: | 39′ | L-W-L: | 32′ | |
| Beam: | 12′ | Displacement: | 24 000 # | |
| Draft (shoal) : | Ballast (shoal) : | |||
| Draft (deep) : | 5.5’ | Ballast (deep) : | 9,200 # | |
| Air draught: | 56′ | Sail area | 1 000′ ^2 | |
| # of closed cabins: | 1 | # of berths: | 6 |
The Corbin 39 is an Airex Sandwiched fibergalss hull, it is a medium displacement hull with great stability and stifness that makes you feel safe in any sea.
Maltese Falcon is a cutter rig which makes sail handling easy for short handed crew.
Major Equipment list:
Anderson winches
Aluminum mast with rod rigging, built by Klako Spars of Oakville Ontario
Raymarine 2 kw radar monochrome digital monitor
SGC 2000 ssb/ham radio
Airmarine wind generator
Rule bilge pumps
Perkins Prima 50 hp deisel engine
Allcraft 6 gl stainless steel waterheater
Garmin 12 xl and Garmin GPS76 hand held GPS’s hard wired to 12 volt system
FrigoBoat refrigeration 12 volts water cooled evaporator bin
Cat Pump model 277 20gl/hr engine driven watermaker
Tankage:
Fuel: 400 liters
Water: 240 liters and 20gl/hr engine driven watermaker
 |
| Corbin 39 cutter rig |
 |
| Corbin 39 brochure |
 |
| Starboard couch |
 |
| Main bulkhead behind covered compression post |
A paper note/shopping list with pencil holder
Joinery detail of engine room access door top
