 |
| The Boat |
|
|
The SV Maltese Falcon
Corbin 39' Specifications
| Category: | Mono | | Construction: | Fiberglass | | L-O-A: | 39' | | L-W-L: | 32' | | Beam: | 12' | | Displacement: | 24 000 # | | Draft (shoal) : | | | Ballast (shoal) : | | | Draft (deep) : | 5.5’ | | Ballast (deep) : | | | Air draught: | 56' | | Sail area | 1 000' ^2 | | # of closed cabins: | 1 | | # of berths: | 6 | The Corbin 39 is an Airex Sandwiched fibergalss hull, it is a medium displacement hull with great stability and stifness that makes you feel safe in any sea.
Maltese Falcon is a cutter rig which makes sail handling easy for short handed crew.
Major Equipment list:
Anderson winches
Aluminum mast with rod rigging, built by Klako Spars of Oakville Ontario
Raymarine 2 kw radar monochrome digital monitor
SGC 2000 ssb/ham radio
Airmarine wind generator
Rule bilge pumps
Perkins Prima 50 hp deisel engine
Allcraft 6 gl stainless steel waterheater
Garmin 12 xl and Garmin GPS76 hand held GPS's hard wired to 12 volt system
E-zkold refrigeration 12 volts water cooled with holding plate
Cat Pump model 277 20gl/hr engine driven watermaker
Tankage:
Fuel: 400 liters
Water: 240 liters and 20gl/hr engine driven watermaker
|  | | Corbin 39 cutter rig |
|  | | Corbin 39 brochure |
|  | | Starboard couch |
|  | | Main bulkhead behind covered compression post |
|
|
|
|
|
|
|
 |
|
|
|
|  | | New topside and bottom paint September 2007 |
|  | | Stern detail shown also windvane attachment |
|  | | Cutaway keel and rudder hang on skeg |
|  | | Salon looking forward |
|  | | Forward Cabin |
|  | | Head compartment |
|
|
|
|
|
